Description
Features:
1. The 10W wireless charger supports fast wireless charging function, in line with the QI wireless charging standard.has Apple/Android/Type-C three power interfaces. Even if your phone does not support wireless charging, as long as you plug in this magnetic interface, you can achieve wireless charging.
2. Realize short-distance wireless energy transmission through magnetic induction. All electronic devices that meet the QI standard protocol can use the 10W wireless charger for charging.
3. When using a 5V output adapter, the wireless charger supports a 5W load, and when using an adapter that meets the QI3.0 standard, the wireless charger supports a 10W load.
4. Overvoltage protection: When using an adapter that meets the QI3.0 standard for charging, the input voltage rises from about 9V to over 9.5V for overvoltage protection.
5. Over-current protection: When using an adapter that meets the QI3.0 standard for charging, the current is adjusted by the current demand returned by the load device, but over 1.8A will perform over-current protection and the device will be reset.
6. Over-temperature protection: When the wireless charger is used for charging operation, the wireless charger will detect the heating temperature of the load device in the charging state. When the temperature is on the warning line, the wireless charger will adjust the current to make the temperature drop or even break. Electricity protection.
Parameter:
Color: black, gold, silver
Power interface: Apple/Android/Type-C, support QI 3.0 protocol
Sensing distance: 0-8mm
Safety protection: over voltage, over current and over-temperature protection
Package Included:
Wireless charging stand x 1
Features
- 【Wireless Fast Charging & 2020 Newest Support All Smart Phone】Wireless car charger adopts high charging efficiency upgraded independent coil, supports all Qi standard wireless charging mobile phones.With Apple/Android/Type-C three power interfaces, even if your phone does not support wireless charging, as long as you plug in this magnetic power interface, you can also achieve wireless charging.
- 【2 in 1 Functions & Multiple Protection】Qi Wireless Car Charger combines an windshield dashboard phone mount holder and a wireless charger into one. To Using GPS navigation while driving, it is easy to hold your phone. Our Qi car charger has a built-in intelligent chip with multiple protections such as overcharge, overcurrent, short circuit, temperature control, etc.
- 【Infrared Sensing Phone Charging Holder】The latest evolution in 2020 is an in-vehicle charging holder that uses infrared sensing technology. Sensing range is within 10cm. When the smartphone is close to the detection area, catch automatically opens and the smartphone is fixed. In addition, when you gently touch the sensing area on the back, the lock will automatically open, so you can easily remove the smartphone.
- 【One-hand Operation and Noiseless】Uses a ball joint that rotates 360 degrees, allowing you to use your smartphone freely both vertically and horizontally, adjusting it to the desired angle, and setting it to an easy-to-read position. You can drive safely without disturbing your line of sight. Noiseless smart sensor grips the phone strongly, even though the road is difficult, it doesnt make any noise.
- 【Stability & Safety】Each clip of the stand uses soft silicone, non-slip, shock absorption, and also protects the car vents or phones from scratches. Air vent phone holder mount compared with windshield or dashboard mount,even on the Complicated roads, there will be no power failure and it can keep the phone stable.