Description
Size 5M- 16.4 Feet:4/5" x 5.46yd(W)
Tools:Iron,tape
Step:
A. Firstly,find out the location of the leak.this can be done by wearing the gore-tex clothes in water for a short time and then checking the inside for a “wetspot”.
B. Turn the Gore-tex garment inside out,and clean damaged area by a dry cloth for repair.
c.Covering the seam tape with a piece of paper or cloth is a good technique that will help shield and protect your iron and the tape
D. Using a household iron at moderate temperature(302°F-320°F).You will patch the inside of the 3-layer fabric.
Cover small tears and holes by enclosed adhesive tape by 2/5" larger.Keep the adhesive side down,place over the hole,and medium/hard pressure for 10-15 seconds.
E. After the seam tape cools, check for any loose edges and use the iron again if necessary.
Repairs should appear the same as taped seams inside the garment.
Features
- Hot melt seam sealing tape-nylon or polyester tricot backer,waterproofness- 20,000mmH2O and breathability 10,000g/m2/24hr higher than the competition
- 5M(4/5"(W) x 5.46yd(L)) length of hot melt seam sealing tape,Using a household iron at moderate temperature(302°F-320°F) and medium/hard pressure for 10-15 seconds
- Seam sealing tape heat applied to sealing sewn seams / Repairs on Gore fabric and a wide variety of similar materials-drysuit,waders,breathable rain jacket, waterproof pants,wetsuit,neoprene stockingfoot
- Iron-on tape that provides a waterproof and long lasting finish to sewn or welded seams of Neoprene,2-layer/3-layer/4-layer/5 layer high performance waterproof breathable textile.Seam tape features additional strength to the seam and stretches in every direction to provide a longer lasting bond,excellent performance and durability
- FULL CUSTOMER SUPPORT - Our customer support team is available 24/7 to answer any question and solve any situation. If you’re not satisfied with your new wetsuit repair tape,we’ll happily give your money back