Description
Description
FOR USE WITH GAS PRESSURE WASHERS, (some electric pressure washers may not fit the Edge Blasters connection and are under powered for a good clean job). Just compare your connection to the connection in the pictures and make sure your pressure washer is 2500 PSI or greater. Spray wand should be 36 inches long or greater. Ideal length is 3 feet 6 inches long for the average height person. Your wand connection must look similar and be the same size as the connection in the pictures. GRASS MUST BE EDGED WELL BEFORE CLEANING, LEAVING AT LEAST AN 1/8" GAP AND 1/2" DEEP GROOVE BETWEEN CEMENT AND GRASS. PRESSURE WASH YOUR EDGES FIRST THEN PRESSURE WASH THE INFIELD. The Edge Blaster is a high pressure cleaning tool for cleaning the edges of driveways and sidewalks. The aluminum deflector plate will prevent high water pressure from directly hitting grass, flower beds, mulch etc. greatly minimizing the mess of pressure washing. Just edge your driveway or sidewalk first and then clean the infield with your wand or surface cleaner. PATENT US 9,522,408
Features
- FOR USE WITH GAS PRESSURE WASHERS FOR CLEANING EDGES OF DRIVEWAYS AND SIDEWALKS
- ALUMINUM HIGH WATER PRESSURE DEFLECTOR PREVENTING MAJORITY OF FLYING DEBRIS FROM GRASS, FLOWER BEDS, MULCH ECT
- PLUG YOUR PRESSURE WASHERS WHITE SPRAY TIP INTO THE EDGE BLASTER THEN PLUG EDGE BLASTER INTO YOUR WAND
- EDGE BLASTER WILL WORK WITH FORWARD MOTION OR CAN BE PULLED BACKWARDS IF GRASS IS NOT EDGED WELL
- 100% MONEY BACK GUARANTEE