Description
Sensky BS010l Dc12v to 24v Mini Pir Motion Sensor Switch,occupancy Sensor Switch
Description:
PIR(Passive infrared) Motion sensor is pyroelectric device can detect human movement by detecting Infrared ray emitted by human body.
Automatic Induction: When people enter into the range of induction, it will output a voltage equal to input voltage, after the delay time, it will output 0V; during the delay time if motion detected, the delay time will reset, and start a new delay time.
widely used on the Motion-activated lighting, LED strips Security System, automatic sensory device and more.
Specifications :
Operating voltage：DC12V
Load current：3A
Delay time（Default setting）：5-25s (2~280 Seconds adjustable)
Detecting range : About 110 degrees cone angle
Detecting distance: 4M-7M (10cm-7M adjustable)
Trigger way : continuous triggering
Blockade time: 0 seconds
size: 48*25*14 mm
Attention:
1.Don't exposed to direct sun light or lighting, big wind, near a heater or air condition.
2.Don't fix it at a place where there are obstructing material (e.g. Glass, dense clothes) which IR cannot get though.
3.Don't fix it in strong shock or vibration environment.
4.The PIR Sensor requires a 'warm-up' time in order to function properly, about 10s to1min,depend on the delay time; during this time, the signal triggered by the module is not stable, after one minute, it will be ready.
Description:
PIR(Passive infrared) Motion sensor is pyroelectric device can detect human movement by detecting Infrared ray emitted by human body.
Automatic Induction: When people enter into the range of induction, it will output a voltage equal to input voltage, after the delay time, it will output 0V; during the delay time if motion detected, the delay time will reset, and start a new delay time.
widely used on the Motion-activated lighting, LED strips Security System, automatic sensory device and more.
Specifications :
Operating voltage：DC12V
Load current：3A
Delay time（Default setting）：5-25s (2~280 Seconds adjustable)
Detecting range : About 110 degrees cone angle
Detecting distance: 4M-7M (10cm-7M adjustable)
Trigger way : continuous triggering
Blockade time: 0 seconds
size: 48*25*14 mm
Attention:
1.Don't exposed to direct sun light or lighting, big wind, near a heater or air condition.
2.Don't fix it at a place where there are obstructing material (e.g. Glass, dense clothes) which IR cannot get though.
3.Don't fix it in strong shock or vibration environment.
4.The PIR Sensor requires a 'warm-up' time in order to function properly, about 10s to1min,depend on the delay time; during this time, the signal triggered by the module is not stable, after one minute, it will be ready.
Features
- Operating voltage: DC5V-25V Load current ≤3A
- Detecting range：4M-7M (10cm-7M adjustable) 110 degrees cone angle
- Delay time: default setting : 5-25s (2~280 Seconds adjustable)
- Light Sensor: 20lux (10Lux ~300Lux adjustable)
- Automatic Induction: When people enter into the range of induction, it will output a voltage equal to input voltage, after the delay time, it will output 0V; during the delay time if motion detected, the delay time will reset, and start a new delay time.