SATLINK WS-6916 HD Satellite Signal Finder Meter, DVB-S/S2 Digital Directv Dish Network Satellite TV Finder with MPEG-2/MPEG-4, , Black

Features: 3.5 Inch High Definition TFT LCD Screen Fully DVB-S/S2, MPEG-2/MPEG4 compliant MPEG-2 / H.264 Hardware decoding Digital meter for signal strength and quality Supports for multiple TP detection Supports scan of Auto,Blind,Manual or NIT Sound and Light Alarm for Locking Signal Auto Calculate Angle of AZ ,EL Supports DISEQC 1.0/1.1/1.2 ,0/22khz Tone Speaker Integrated Support both AV out and AV in Supports HDMI out LNB short protect 7.4V/3000mAh Li-ion Battery Included Easy to carry. Simplified MENU OSD Instruction: After power on, press ok into the main menu then start to set below functions: For OSD Language/Channel Name/Band Width/ Carrier/ Modulate/FEC/Guard Interval/Output Level/Signal Source functions setting: You can press◀▶to change or select them. For Frequency setting: You can press◀▶ move cursor and press ▲▼ key to change numbers. For Service Provider/ Program Name setting: just input the name is ok. For Factory Setting: press OK to confirm. After setting above, you can use it normally. Operation: After WS-6916 satellite finder is connected to the antenna, rotate the antenna 360°, and adjust the position and height of the antenna to find the best angle and position of the antenna by the strength displayed on satellite finder. Tips: 1. WS-6916 Satellite Signal Finder Meter only compatible with free digital signal finders. It can’t search cryptographic satellite signal. 2.WS-6916 system can be upgraded to search the updated satellites via USB port and it is used to search the US satellites. But it can search EU satellites via system update. However, two systems can not exist in the same time. Please email us before you upgrade the system.