Description
DarkEagle tent stakes, your best companion in camping! They will accompany you and hold your camp safely in their sturdy hands forever!
Instruction:
1. Put the end of the stake on the ground at the angle of 60 degree.
2. Hammer it into ground and leave about 1.5 inches out.
3. Fasten the tent rope between the hook and nail or in the hole on the hook.
4. Untie the rope and put it away.
5. Use the hole to pull the stake out with a tent hammer.
Warm Tips:
1. Please wipe the dirt or dust on it first.
2. Clean it with a little wet rag and dry it outside.
3. Finally lubricate it some and keep it in a dry and ventilated place.
Specifications: Length: 12 inches/8 inches
Diameter: 0.40 inch
Material: Forged S45C Steel
Color: Black
Features
- DarkEagle pegs are about 12 inches/8 inches long whose diameter is about 0.4 inch
- Made of prime forged S45C steel - off snapping and bending problems forever
- Bonus fluorescent rubber circle (absorb light before use) and burly 3-eye rope tensioner for 5mm pararopes
- The large head and sharp end make it easily go into rocks and hard soil and stay stable in sand and snow
- The hook prevents the stake from going too deep and the hole for pulling it out