Nephon Anti-Spy Signal Detector GPS Signal Detector Spy Bug Camera Wireless Detector Spy Detector Device GPS RF Scanner Finder GSM Device Finder

Instructions 1,Turn switch on( button up), second ledlights, means power to work normally. 2,Turn the knob clockwise to the largest, enter standby mode. If receiving stronger environmental signal, then adjust the rotary knob back, the light flash not more than the fifth light. 3,Strong, the sound will be more rapid al is more,signal is full, soundbeep" the sign 4,When light bars are full and bright, the sound is more rapid, means it is near to the target. If we adjust the rotary knob back when the signal is strong, so it is easy to find the target object. 5,Due to high sensitivity, so we can receive the signal from Mobile phone base stations,television broadcasting station on the road. If you want to find car GPS, pls drive it to the place with weak signal, also pls set the equipment of communication as airplane mode, then the detector can work. 6,If there is no target in the room but the detector will alarm at times, the possible will be: 1) Your own communication equipment will match code with base stationin timing and automatic. 2)the target is near to the room, maybe in another room, or somebody called in another room. 3) Too close with the wireless router Technique Data Frequency Range : 1MHz-8000MHz Detecting the dynamic range: <73Db Detection sensitivity: ≤0.03mw ( main frequency) Detect range: 2.4GHz wireless camera: 15㎡ (standard 10mW camera) 1.2GHz wireless camera: 10 ㎡ (standard 10mWcamera) Moblie:2G,3G,4G: 10 ㎡ Indicating : 9level LED Luminous instructions/modulation sound instructions Power : built-in 3.7 V800mAH lithium polymer battery Working current : 60mA working time : 10-15 hours Material: aluminum alloy Weight:160g Volume : 102x52.5x21.5mm Package Included: 1 X Signal Detector 1 X Use Manual 1 XData line 1 Xcharger