Description
No need to plug in or install batteries 3 in 1 design： Our 3-in-1 soil moisture meter combines moisture meter, pH acidity and light sensor together, not only help you save both precious time and money, but also let you know plant when to water, and if it has sufficient sunlight or soil pH is good for plant growth. Specifications: Color: BlackPH Range: 3.5-8 pH (3.5-6.5 Acid, 7-8 Alkaline) Moisture Range: 1-10 (1-3 Dry, 4-7 Nor, 8-10 Wet) Relative Light: 0-2000 lux (0-200 Low, 200-500 Low+, 500-1000 Nor, 1000-2000 Hgh) Product Size: 8.25 x 2.0 x 1.74 inches Copper Probe Diameter: 0.2 inch Aluminum Probe Diameter: 0.2 inch Probe Length: 5.34 inches Distance Between Probes: 0.5 inch Product Weight: 2 oz/56g How to Use: Step 1: Switch to moisture/pH/light position according to demand Step 2: Insert the probe into the soil about 2-4 inches . Step 3: Adjust the position of the probe until the pointer on the dial swing slightly . Step 4: Check moisture/pH/light level in the dial after 10 minutes and the pointer has stabilized. Step 5: Remove probe from soil and wipe clean after each use .
Features
- RELIABLE: The Double-needle Detection Technology enhances the speed and accuracy of detecting and analyzing soil moisture and pH acidity, Pass detailed information to conductors to show you accurate values.
- 3-IN-1 FUNCTION: Test soil moisture, pH value and sunlight level of plant ,quickly helps you specialize in grasping when you need to water your plant, control the pH value in the soil and is it necessary to extend the sunshine time and irradiation intensity.
- EASY TO USE & No BATTERIES NEEDED: Simply insert the probes into the soil about 2-4 inches (2/3 of the probes), and you'll get your reading,No batteries or electricity needed.
- INDOOR & OUTDOOR USE: Design to be lightweight and portable, easy to carry around for outdoor use,for home , garden, lawn and farm.
- Tips: 1. Do not touch the stone or hard rocky soil. If the soil is too hard and too dry, it will easily damage the probe. 2. Designed for testing soil only, not for water or other liquids. 3. After use, you need to clean and wipe the probe. 4. When the instrument is in the soil, you must wait a few minutes until the pointer stops swinging to obtain a stable and accurate reading on the dial.