Monkeybrother Thread Skein Ball Tidy Machine Hand Operated Wool Winder Holder for Swift Yarn Fiber String Ball

Monkeybrother Hand Operated 8.6"*3.3"*8.6" Swift Yarn Fiber String Ball Wool Winder Holder Description: The wool winder is small and light, but efficient Perfect for family-use and portable, help you to avoid the skein problem. There is a detailed usage instruction paper, so please rest assured purchase. It is convenient to set up , can be put in most of table sides. or install on working desk or bench How to use the Wool Winder: Lock the winder at the table, tighten up the button to fix it, and put the string through the iron wire to block on the groove of the disk. to wind your yarn into balls by simply turning the crank Operation: 1, Set spindle into geared base by aligning notches. While holding geared base, turn spindle clockwise to secure. 2.Clamp the ball winder to table or other support using integral clamp, clamp will work on thickness up to 1.5''. Clamp is controlled by turning red knob. 3.Rotate yarn guide so loop end faces upward. Pull it out as far as it will go, locking it into working position as shown. 4.Yarn to be wound should be supported on a swift to allow uniform transfer. Feed end of yarn through yarn guide and secure in notch on top of spindle. Yarn is easily placed through guide by simple wrapping it, in a clockwise direction, around the end coil. 5,Turn handle clockwise, forming the yarn into a ball. Finished ball can be withdrawn from winder by simply pulling off from underside of ball. Yarn from ball can be used by withdrawing from center core or from outer edge. Make Monkeybrother the Favoured Choice