LEDwholesalers 12-Volt 16.4-ft RGB Color-Changing Kit with Controller and IR Remote, Power Supply, and LED Strip in White PCB, 2034RGB-R2+3369+3208

These LED color-changing flexible strips are great for nearly any application. Each kit comes with a 16.4 ft (5 meters) long LED light strip reel, controller with wireless IR remote, and the power supply. Everything needed to add great light to any location. Specifications (LED strip) * LED Quantity/Type: 150x SMD5050 RGB * Input Voltage: 12 VDC * Power: 21.3 W * Beam Angle: 120º * Dimmable: Yes * IP Rating: IP33 * Pin Order: +RGB * PCB Color: White * Width: 10 mm * Length: 16.4 ft (5 m) * Wire Leads: 22 AWG * Compliance: CE, RoHS * Life Expectancy: 35,000 h * Warranty: 1 year Wiring * Unroll LED strip completely. * Any exposed wires on the other end of the LED strip must not touch one another (or any metal object), creating a short. * Connect the 4-pin connector of controller to that of the LED strip. * Connect DC jack of power supply to controller. * Remove the plastic seal in the battery compartment of the wireless remote. * Double check that all connections are correct and secure, then plug in power supply to power outlet. Note * While the included controller can handle the power requirement of two such strips, the power supply only has the capacity to drive a single strip. * Do not lengthen the LED strip by directly connecting an additional section to it. * Test all components before permanent installation. * Make sure that wires at the other end of the LED strip are not touching one another (or any metal object), which would create a short circuit. * The LED strip is cuttable every 3 LEDs, approx. every 4", at the designated cut marks. Items Included * (1x) 16.4ft RGB LED strip with white PCB * (1x) RGB controller with IR remote * (1x) Power supply