Description
The
KZYEE KM50 Power Scan kit is the most revolutionary circuit tester to date, which works off of
12-24 Volt sources, featuring
DC Voltage, AC Voltage, Frequency, Duty Cycle, Fuel Injection Circuit Detection, Resistance, and Diode This power scan is indeed the ultimate in power and affordability, allowing users to check circuitry in one single step. An absolute must for every technician who is looking for a fast and accurate solution to electrical systems diagnostics.
What’s new for KM50? It does KM10 does and more!
1.Diagnose 12 ~24V automotive electrical systems swiftly and accurately.
2.Show battery voltage reading and help users determine circuit polarity immediately after connecting the KM50 clips to the vehicle battery.
3.Test DC Voltage, AC Voltage, Frequency, Duty Cycle, Fuel Injection Circuit, Resistance, and Diode. Especially, in AC Voltage, Frequency, Duty Cycle, and Fuel Inject Modes, users can long press the mode button for 3 seconds to switch between Waveform Display Mode and Digital Display Mode.
4.Activate electrical components and test their functions without jumper leads – by depressing the rocker switch to conduct a positive or negative battery current to the tip so as to power up electrical components.
5.Test bad ground contacts instantly without performing voltage drop tests.
6.Help users to follow and locate short circuits without using external fuses.
7.Test continuity with the assistance of its auxiliary ground lead.
8.The tool is short-circuit protected. If it becomes overloaded, Its internal circuit breaker will trip to protect the instrument from overload.
Specification:
Supply Voltage: 8V DC ~ 30V DC
DC/ AC Voltage Test: -110V ~ 110V
Frequency:0Hz ~ 1Mhz
Duty Cycle:0.0~100.0%
Fuel Injection:Voltage: 0~180V, Time: 0~25ms
Resistance :0~1MΩ
Diode: Germanium diode, silicon diode
Rating Current：1A~8 A
Features
- KZYEE KM50 Circuit Tester Kit is an upgraded version of KM10, which performs each type of testing modes, like DC Voltage, AC Voltage, Signal Frequency, Duty Cycle, Fuel Injection, Resistance, and Diode.
- Quicker troubleshoot and diagnose circuit conditions by switching waveform display from the digital display for AC Voltage, Frequency, Duty Cycle, and Fuel Inject testings by long-pressing the mode button for 3 seconds.
- Activates electrical components and tests their functions without jumper leads – by pressing the rocker switch to conduct a positive or negative battery current to the tip so as to power up electrical components.
- Fuel Inject testing is specially set-up for fast and easy injector circuit diagnosis. One quick connection to the circuit and the KM50 will display all the needed fuel injector testing information.
- The built-in flashlight is bright enough to light up your work area, and the flashlight and the buzzer themselves can be turned off.