Description
JVCC 762-BD Bi-Directional Filament Strapping Tape is a fiberglass reinforced polypropylene tape which gives you 155# tensile strength in both directions (measures the tape's resistance to being broken apart as stress is applied). It is a high strength, cross bi-directional filament tape used for extremely demanding strapping, bundling and palletizing applications. High tear resistance makes it ideal for tabbing/seaming in the metal fabricating industry. Can also be used as project material for building out a Hexayurt shelter. Referred to as strapping tape or string tape. 762-BD bidi tape also helps to reduce the amount of tape needed for your project since it has filaments in both directions of the tape; traditional filament tape is one direction only.
If not otherwise specified widths shown in dropdown are in inches. NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 12mm x 55m. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first. Warning: This product can expose you to chemicals including Toluene, which is [are] known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/.Technical Information- Core: 3 inch diameter neutral
- Backing/Carrier: fiberglass reinforced polypropylene film
- Adhesive: synthetic rubber
- Thickness: 4.7 mils (carrier, adhesive)
- Adhesion: 91 ounces per inch (to stainless steel test panel)
- Tensile Strength: 155 pounds
Features
- JVCC 762-BD Bi-Directional Filament Strapping Tape (also known as string tape) is a polypropylene tape that features a strong synthetic rubber adhesive that provides 91 ounces per inch of adhesion strength. It bonds strongly to many surfaces, from plastics to metals. The cross fiberglass reinforcement makes it highly resistant to tears and gives it 155 pounds per inch of tensile strength.
- This bidirectional filament tape is extremely durable, designed for high-stress jobs like metal fabrication. Are you headed to Burning Man or another big festival? This filament tape is ideal for building your hexayurt shelter.
- Tape rolls are typically cut to standard tape industry metric-cut sizes - or approx 5% narrower than the nominal size (i.e. 24mm per 1-inch of nominal width ordered).
- JAdhesive: synthetic rubber. Carrier/Backing: fiberglass reinforced polypropylene film. Thickness: 4.7 mils (carrier, adhesive).
- Adhesion: 91 ounces per inch (to stainless steel test panel). Tensile Strength: 155 pounds per inch (longitudinal) 155 pounds per inch (transverse). Elongation: 6%. Core: 3 inch diameter neutral