Description
Heavy-duty TV wall mount with easy installation, The FM-32 Husky Mount is made of heavy-duty steel construction. It can be secured to a single stud or concrete/brick wall with included lag bolts. It comes ready,no further assembly required. All necessary hardware included. Note: the TV screw sets provided are of standard size. They fit the majority of TVs. Should your TV require a different sized screw; the size can be established through the TV User Manual and can then be purchased from your local hardware store. Full motion TV wall mount articulates swivels & tilts. To maintain a clear view for your flat screen TV from any position in the room you need a full motion TV wall mount,this mount features up & down tilt,swivel function for a full range of motion. Note: the larger the TV the smaller the swivel angle possible. Because a larger screen will touch the wall sooner when swiveling it. It allows you to extend your TV up to 15" from the wall and collapses back to a flat position with 1.9" low profile. Suitable for Corner TV wall mount. Will it fit? Two factors will determine whether it's compatible with your TV:- VESA patterns: It has standard VESA patterns up to 200x200. Means the distance between the mounting holes on your TV should be ONLY 8"x8", 8x6, 8x4 or 4x4.It WON'T FIT 4"X6" which is VESA 100X150 (Some TCL TVs)- Weight: Your TV should not exceed 66lbs. The FM-32 is recommended for most 32" TVs. However it can fit larger LED LCD as long as the weight and VESA are within range. Note: The TV sizes recommended for this mount are provided as a general guidance only. The weight and the distance between the mounting holes on the back of your TV are the main determining factors of TV & mount compatibility. Please determine them to be certain this bracket is suitable for your TV. Also, its face plate is 9"x 9", if cable plugs are located between or near the mounting holes on the back of your TV. Please make sure they won't be blocked by the mount's plate.
Features
- Durable ultra-strong construction. Supports up to 66 lbs weight and VESA up to 200X200,this means The mounting pattern on the back of the TV should be: 8"X 8", 8"X 6", 8"X 4" or 4"X 4".IT WON'T FIT 4"X6"wich is VESA 100X150. Note;If cable plugs are located between or near the mounting holes on the back of the TV, please make sure they won't be blocked by the 9"x9" mount's plate.And if you are using it on TV smaller than 32",make sure the TV's frame is wide enough to cover the 9"x9"mount's plate
- Fits most 32" TVs. It can fit larger size TVs as long as the weight and VESA are within range listed above. Please check VESA (TV mounting hole pattern), possible blocked cable/input and TV weight prior to making purchase decision to determine whether this TV wall mount fits your TV.
- Swivel freely left and right due to its single arm design. Tilts down for optimum viewing angle and glare reduction. M6/M8 wrench is included with the hardware kit to tighten or loosen the tilting nut if necessary. Note: The wider the TV the smaller the swivel angle possible, because larger TV will touch the wall sooner as swiveling it.
- Great for corner mounting as well due to its long swivel arm design, Allows extension of the screen up to 15" and retracts it back as close as 2" from the wall
- Perfect for single wood stud or brick/concrete mounting. All necessary mounting hardware and instructions Manual included, Note: the TV screw sets provided are of standard size. They will fit the majority of TVs on the market. Should your TV require a different sized screw; the size can be established through the TV User Manual and can then be purchased from your local hardware store. Please reach out to us if you have any problems at all.