Description
Description:Power Supply:DC Voltage 2.8V~6.0V,Typical:3.3V or 5.0V Consumption:Capture 50mA@5V Receiving Format: GPS, GLONASS,Galileo,BeiDou,QZSS and SBAS Receiving Channel:72 Searching Channel Receiving Sensitivity:Trace -167dBm , Capture-148dBm Positioning Time:Cold Start: avg26s , Warm Start: avg25s, Hot Start: avg3s Level Positioning Precision: 2m At Open Wind Output Frequency:1Hz-10Hz,Default 1Hz Speed Precision: 0.1 m/s (Without Aid) Acceleration Precision :0.1 m/s (Without Aid) Dynamic Characteristics:Max Height:18000m, Max Speed:5153m/s,Max Acceleration:4G UART Interface:UART Port:TXDA and RXDA Support Rate:4800bps to 115200bps,Default 38400dps Working Temperature:-40℃-+85℃ Storage Temperature:-40℃-+85℃ Size:28mm x 28mm x 10mm The Module's Pins:SDA,GND,TX,RX,VCC,SCL Features: GPS Module,Dual Module Compass With electronic compass IC HMC5883L 1.25mm spacing between the 6pins patch seat Note: Can not use for flight control with SCM, but it is suitable for Open source flight controller. GPS Program Set up documents and instructions:Please click here BN-880 GPS Configuration files Package Included: 1x BN-880 GPS Module 1x 15cm Cable
Features
- Beitian BN-880 is suitable for Open source flight controller, not for flight control with SCM
- It is dual module compass, with and electronic compass IC HMC5883L
- This gps module has flash to save configuration. So you do not need to reset next time when you use it.
- DIts data Level is TTL or RS-232,Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable
- When you use it for Raspberry Pi, there is no driver needed but you need to install software