Description
This is a ready-to-use kit of 4 SP10 asphalt anchors and a matching quantity of EPX2 grout. The SP10-38 is used in conjunction with our EPX2 grout to bond with existing asphalt. Constructed from zinc plated steel, the bottom of the anchor is flared and sealed to act as a wedge when pushing the anchor into the ground. A welded spiral along the length of the anchor provides for a strong bond with the grout. The top of the anchor incorporates a large washer with internal female 3/8" thread accomodating up to 2" bolts. Supplied with 1" washer and 3/8" x 1" hex-head bolt.
Features
- The SP10-38 anchors are pull-rated for 1,500 lb.
- The kit contains 4 SP10 and 2 bags of EPX2 grout
- Installation: The installation requires drilling a 7/8" (22 mm) hole, 6" (150 mm) deep, into the asphalt and the gravel below it. The hole is filled with EPX2 grout and the anchor is dropped in. The anchor is ready for use in 15 minutes (depending on grout and ground temperatures).
- Benefits: Installed anchor is flush with ground. After use, can be left in ground without danger of pedestrian tripping.
- Bike Racks -Fabric-Sided Structures -Blast Deflectors (airports) -Sound Barriers -Fences -Signage -Carports -Lean-to Sheds -Shelving -Shopping cart corrals -Street Lights -Traffic Signs -Railings and Guardrails -Bus Shelters -Equipment Platforms -Static Discharge poles -Bleachers -Oil Drums tiedown -Solar Panels -Outdoor Furniture -Steps -Cable troughs