Description
Working principle: create smoke through the equipment and sent smoke to sealed car pipeline system(Such as air intake systems, exhaust systems, fuel systems, air conditioning systems, etc.) Where there is smoke in the pipeline, there is a leak With smoke detectors to check the car pipeline, will not have impact on the car system
How to Use: 1.Open the engine cover, and hang the detector in the cover. 2.Disconnect the pipe that needs to be connected with detector. If the pipe needs to be disconnected in the middle. Please secure the other side with a rubber stopple. 3.Secure this side with proper taper stopple/pipe, and connect it with smoke output tube. 4.Connect detector with DC12V battery: red with positive, black with negative. Do not connect in a contrary way. 5.Turn on the power switch, and detector starts to work. 6.In about 3 minutes, the pipe will be filled with smoke. Check the leak points. Please use head lamp if necessary. 7.After leak detection, please connect well the wires and pipe. 8.Notes: * Please do leak detection away from smoke-sensitive parts. * Do not run the detector over 8 minutes. It needs interval rest. * The detector has protector. If it exceeds working limit, it will power off automatically. In this condition, please operate it later. * The round parts of this detector is with temperature, be careful to avoid scalding injury.
Package List: 1.Main Unit 2.Hook 3.Rubber stopples 4.Taper stopple 5.Taper pipe 6.30ml oil bottle 7. User manual
Features
- With longtime high temperature, the smoke and oil will oxidize and deteriorate. It will infect the ser-vice life of smoke generated part, so please change smoke and oil regularly.
- When you use this detector the first time, please fill 20-30ml oil, not beyond this range.When the smoke output has water drops, please replace with fresh oil.Before filling fresh oil, please pour out the remaining oil in the detector.Liquid paraffin and baby oil are OK.Please fill fresh oil with equipped oil bottle.
- Power: DC12V, vehicle battery,Smoke output value: 6l/min,Built-in air supply,Controllable flow value
- SDT-202 is designed for detecting the leakage of pipe systems on cars, motorcycles, such as fuel pipe, air intake system and cooling tank.SDT-202 is for all pipe systems, including EVAP.
- Inbuilt air compressor,Instant smoke generation. Self-protective system will keep machine away from overload,The machine will change special oil(baby oil or mineral oil) into smoke, then blow smoke into sealed pipe system. you will find leak point in pipe via the smoke. Please repair the part where leakage