Description
Retaining the proven reliability of our Etoolcity technology, the automatic dust controller switch is the latest Version of the Etoolcity Vacuum Autoswitch-an essential device in workshops and on job sites for more than a decade.
THE NEW ETOOLCITY AUTOSWITCH FEATURES
★New Current Sensing Technology and Actuation Threshold
★Supports a Wide Range of Cutting Tools from Rotary Handheld Devices to Large Shop Saws
★Prevents Circuit Overload with an Auto Turn-On Vacuum Delay
★Runs the Vacuum Only While You’re Using Your Tool So You Save Time and Electricity
★Automatically Delays Vacuum Turn-Off by 7 Seconds to Continue to Clear the Air While the Motor Spins Down
★Helps to Comply with OSHA Requirements for Dust Control
Highlights of the Etoolcity Autoswitch:
▲STARTUP DELAY.Controls in-rush current to help avoid circuit overload
▲AUTO MODE.Turns the vacuum on automatically with the power tool
▲SHUTOFF DELAY.Allows time for the vacuum to clear the hose of debris
Focus On Your Work:
★Save time
★Minimize airborne dust Reduce
★Cleanup
Product guarantee: Full money back guarantee without reason, 2-year warranty and 24-hour support for customer service.
3 easy steps to install:
1: Plug the switch into wall
2: Plug vacuum into 'B' port outlet and switch on the vacuum
3: Plug tool into 'A' port outlet and use your tool as normal
ELECTRICAL SPECIFICATIONS Outlet Required:
1.Standard 120V/15A or 220V/10A,50/60Hz Outlet
2.Input Connection: 3prong(grounded)male
3.'A' Port Power Rating: 120V/15A or 220V/10A,50/60Hz
4.'B' Port Power Rating: 120V/15A or 220V/10A,50/60Hz
5.Actuation Threshold: ~0.25 Amps(about 30W at 120V)
Package Included:
●1x Automatic vacuum switch with 15'' power cord
●2x Mounting screws
●1x Installation instruction
●1x Strong nano-markless hook sticker
Features
- Unique Current Sensing Technology. If the tool motor connected to the 'A' port exceeds 30W, the vacuum connected to the 'B' port will automatically delay 1s to turn on, which helps prevent circuit overloaded by large current if tool and vacuum power-on at the same time
- Make the work more effective. Automatic delays 1s to turn on the vacuum when you start your tool, and delays 7s to turn off the vacuum to clean the inlet tube when you complete your work. Saving time and electricity, reducing airborne toxin and work area noise that can lead many health problems
- Suitable for most medium duty workloads. Etoolcity automatic vacuum switch has a starting threshold of approximately 0.25 amps(30watts at 120V and 60watts at 220V), perfectly suited for medium-sized work loads such as most Miter Saws, Table Saws, Power Sanders and Routers, and extend the life of your vacuum
- Adopting high-cost, UL-certified American Standard 14AWG power cord which allowable passage with a large current that more than 30A, the Etoolcity Automatic Vacuum Switch can work stably within 3600W. The switch's shell has PC+ABS V0 grade flame retardant material, it is more reliable and safe to protect work
- Two Installation Methods. You can use screws to fix the power module part, or use strong nano-markless hook sticker to attach directly to the wall. Both ways are very strong