Description
installation procedure
Step 1: Drill 1-1/8inch hole.
Step 2:Drop the fitting male piece inside.
Step 3: Pick up the fitting from outside.
Step 4: Tighten the nut.
Step 5:Wrap with thread tape.
Step 6:Tighten the faucet clockwise.
Step 1: Drill 1-1/8inch hole.
Step 2:Drop the fitting male piece inside.
Step 3: Pick up the fitting from outside.
Step 4: Tighten the nut.
Step 5:Wrap with thread tape.
Step 6:Tighten the faucet clockwise.
Features
- Heavy Duty 3.14 oz Solid Brass Bulkhead Fitting, 1-1/8 inch female threaded all the way, install spigot on either end. Heavy Duty 1-1/8 inch No Kink Quarter Turn Solid Brass Ball Valve with Garden Hose Hook Up.
- Two installation methods:Brass partition fittings front mounting and back mounting.
- Bulkhead fittings need 1.10 inch diameter holes to install.Fit up to 0.4 inch thickness wall. Large 10mm Flow Opening, Great Flow Rate at Approx. 15 Second/Gallon or 4GPM, Tested with 2 ft Water.
- Tools needed for installation: electric drill, 1-1/8 inch hole saw, and pipe wrench or adjustable wrench.
- Two washers(8mm between inner ring and outer ring) are effective in preventing leakage.