Camera Full-Frame Sensor Cleaning Swab Type 3 (for Both CCD/CMOS sensors): 10 X 24mm Sensor Cleaning Swabs

UES DDR-23 DSRL or SRL Digital Camera Full Frame Sensor Cleaning Swabs Features: The patent cleaning swab has extremely soft head, no damage to your sensor. The headcover is made of super fine microfiber cloth which is soft to your sensor and hard to the dirt. The width of the swab is 24mm which is compatible with Full-Frame sensors. Each swab is packed in a vacuumed package. Instruction for Achieving the Best Cleaning Result: Clean your camera at a bright and clean area. Set camera to sensor clean mode (make sure your camera's battery is fully charged, otherwise the function is greyed out). Remove the lens. Use a professional air blower to blast the dust from the sensor. Remove the UES full-frame sensor cleaning swab from its vacuumed package and drip 1-2 drops of Cleaning Liquid on the head of the swab. Gently drag the swab from the left of the sensor to right. Turn the swap around and drag the clean side from the right of the sensor to the left. Exit clean mode when cleaning finished. Turn off the power and install the lens. Keep the camera in an appropriate camera bag. Tips: Clean your camera on a regular basis effectively remove dust and other dirt which increases camera's useful life. Make sure your camera's battery is fully charged before your sensor cleaning process to avoid low power reflector turn back to cause damage. One swipe in each direction. The swabs are not reusable. Do not use sensor cleaner at extreme temperature. It works best at room temperature. Keep out of reach of children. Do not eat or play with it!