UES DSLR or SLR Digital Camera Cleaning Swab for APS-C Sensors, Blue, 12 swabs + 15ml Cleaner (DDR-16)

UES DDR-16 DSRL and Mirrorless Digital Camera APS-C Type Sensor Cleaning KitFeatures:⁘ The swab head is extremely soft that is 100% safe to clean your sensor. ⁘ The soft swab head is covered completely with super fine microfiber cloth. It can effectively and efficiently clean camera sensor.⁘ The width of the swab is compatible with all APS-C type sensors. ⁘ Every swab is produced in a 100 Class Clean Room and packed in a vacuumed package. ⁘ The non-aggressive formulated sensor cleaner is alcohol-free and ammonia-free. It is ideal for cleaning both CCD and CMOS sensors. Package Content: ⁕ Sensor cleaner 15ml x 1 Sensor, ⁕ Cleaning Swab 16mm X 12Sensor Cleaning Instruction:1. Before start, shoot a piece of white paper with Aperture Priority (A) mode set at f/22 or higher. On the photo, you could identify where the dust is located on your sensor.2. Make sure your camera’s battery is 100% fully charged. Set camera to sensor cleaning mode, so the delicate shutter and mirror mechanisms stay out of the way, and allow you to access the sensor. 3. Use an air blower to remove loose dust from the sensor. 4. Open one end of the swab package and remove the swab. 5. Dispense 1 to 2 drop of cleaner to the edge of the swab head. 6. Hold the handle at a 60◦ angle, off the surface of the sensor. 7. Swipe the swab from one end of the sensor to the other end with single constant motion. 8. Turn the swab 180◦ and use the clean side of the swab to swipe the sensor in the same direction again with single constant motion. 9. Discard the used swab and never reuse the same swab on any other sensors. Always use sealed one for other applications.