Description
DuPont StoneTech Oil Stain Remover Ready Mix Poultice, 3 Oz. Where to Use Natural stone such as marble, granite, limestone, travertine, slate & sandstone. Grout for ceramic & porcelain tile. Masonry & concrete. Directions Read entire label before using. Use only as directed. Always test in a small inconspicuous area to determine that the desired results will be achieved. Make sure surface is clean, dry, and free of waxes and coatings. Ensure that area is well-ventilated and keep children and pets away from the area during application and until surface is clean and dry. 1. Using a plastic or wood spatula, stir thoroughly to mix the paste. 2. Apply a 1/4" thick layer of paste to the stain. Ensure that the paste extends at least 1-2" beyond the edge of the stain. 3. Do not cover. 4. Allow 48-72 hours for paste to completely dry to a powder. 5. Remove powder and discard. 6. Allow solvent to completely dry from the stone. 7. If stain is not completely gone after drying, repeat process. 8. Clean up residue and tools with mineral spirits. 9. Reseal cleaned area.
Features
- Designed to remove deep, set-in oil-based stains without discoloring the surface
- Easy-to-use product leaves no residue behind
- Recommended surfaces include: marble, granite, limestone, travertine, slate, sandstone, grout for ceramic and porcelain tile, masonry, and concrete
- Approximate coverage is 15-30 square inches at 1/4" thickness