sani-10% Disinfectant Virucide Sanitizer - Concentrated - 1 Gallon Makes Up to 180 Gallons

Sani-10% is designed for use in hospitals, nursing homes, hotels, schools, homes, athletic/recreational facilities, tanning spas, dairies, restaurants, bars, animal quarters and kennels where disinfection, sanitization and deodorization is of prime importance. When used as directed, this product is formulated to disinfect hard, non-porous, inanimate environmental surfaces: floors, walls, metal surfaces, stainless steel surfaces, glazed porcelain, glazed ceramic tile, plastic surfaces, bathrooms, shower stalls, bathtubs, cabinets, tables, chairs, tanning beds and telephones. An E.P.A. registered disinfectant and sanitizer. Concentrated and highly effective 10% quaternary disinfectant, sanitizer and deodorant. Perfect for final rinse sink in bars and restaurants. No final rinse required after application. Disinfecting use rate 3oz to 5Gal Water Sanitizing use rate 3.5oz to 5Gal Water U.S.D.A. approved D-2 EPA Reg. No. 1839-86-70925 EPA Est. No. 70925-CA-001 Use 0.7 oz. per gallon of water. 3.5 oz. per 5 gallons of water. Sanitization will occur only on pre-cleaned surfaces. Allow surface to remain wet for 10 minutes. The sanitizer use-solution can be applied to pre-cleaned, hard, inanimate, non-orous surfaces, with a cloth, sponge, mop, sprayer or by flooding or immersion. For sprayer applications, use a coarse (mist) pump or trigger sprayer. Spray 6-9 inches from the surface. Rub with brush, sponge or cloth. Note: With spray applications, cover or remove all food products .70 Ounces makes 1 Gallon! This whole 1 gallon can make over 200 Gallons! (depending on use)