Description
This type of RGB LED Strip connector is particularly useful when you have to connect left over pieces of RGB LED strip to a controller.
If you cut your RGB strip in 2 sections, you can still connect the strip to a controller since there’s a connector at both ends of the strip.
If you cut your strip in 2 sections, the only thing that you will need is an extra 4 pin connector.
If you cut your strip in more than 2 pieces, in order to connect your strip to a controller, you will need a Quick RGB LED Strip Controller connector like this one.
Features:
Connect RGB LED strips together with this 4 pin wire line
Convenient and easy extension cord, no solder required
Extension line for 5050 3528 RGB LED Light Strips
Flexible and durable wire, you can twist and extend it freely as you like
Specification:
Material (External): PVC
Gauge: 22AWG
Conductor Resistance: 34.6Ω
Dielectric Strength: 300V
Temperature Resistance: -25°C--+80°C
Contact resistance:≤0.03Ω
Insulation resistance ≥100MΩ
Life: 5000 times
Ambient humidity used: 85%RH
Withstand voltage AC500V(50HZ)/min
Ternminal strength(pull) ≥10N
Rated Load: DC50V 0.5A
Applied voltage: 0-36VDC (prohibiting the use of alternating current)
Length: 15cm
Package Included:
Quantity: 8 Pcs* 4 Pin Female Wire Connector, 8*4 Pin Male to Male Connectors
Features
- APPLICATION:Used to extend or connect 5050/3528 4pin RGB LED strip lights to controller or 10mm wide 4-pin flexible PCB connection ,and do not applies it to Single Color (2-pin) connection.
- PREMIUM QUALITY: The 22 awg tinned-copper wire features good anti-oxidation and anti-corrosion properties. And the electrical conductivity is strengthened.
- FLEXIBLE: Flexible and durable wire, you can twist and extend it freely as you like,so there is no angle limit to your led strip lighting system.
- QUICK AND EASY CONNECTION: Convenient to plug into 4 pin rgb led strip, no solder required.