Operation Instructions 1. Machine Start Press the Power Switch, the machine will ring, then “15 minutes” indicator light start flashing. 2. Time Setting There are two ways to set the time: (1) According to the Remote Control(23A battery not include): press on the "15" and "30", "60" button for time setting, then the corresponding indicator lights flashing on the host. (2) According to the button on the host: "set" button for time setting, and the corresponding indicator lights flashing after each time is pressed. 3.Start Disinfection If the time has set, press the "ON" button of the Remote Control or " " key on the host panel will start disinfection, then the machine will first give 30 seconds of the alarm sound and then open the lamp, please leave the room before the end of alarm (UV Light injures human body). 4. Stop Disinfection When the time is over, the machine will automatically stop. In addition, after the start, press the “ ” key again, the machine will stop. 5.Matters Needing Attention (1) This product will produce high intensity ultraviolet light, should be used in no case. Long time exposure to ultraviolet rays will burn the skin and eyes. (2) Please do not direct exposure to animals and plants, valuables should be protected by shading. (3) After disinfection, keep ventilation for 30-90 minutes in order to disperse the gas produced in the process of work. Warning: When the product is working, no people or pets around. Avoid radiation damage to skin and eyes. After use, it is recommended to ventilate for more than 30 minutes.
- 【Safer to use】This light with a 20M remote control distance, 3 gear timing function and 15s delay timing, it will start working 15s later after operated.