Description
Feature：
★ This unit is a photoelectric smoke alarm. The photoelectric technology ,it is more sensitive in detecting slow smoldering fires which generate light smoke, little heat and may smolder for hours before bursting into flames.
★ This smoke alarm dose not contain any radioactive material.Smoke alarms should be installed in every room (except the bathroom and kitchen),finished attics and basements, making sure the people in the home will be able to hear and respond to the alarm sound.
★ Applicable to all kinds of places：The Photoelectric Smoke and Fire Alarm is applicable to Company, Factory, Hospital,Shopping Mall, Hotel, School, Housing,Warehouse,Etc.
Product Description：
power:DC 9V battery
Operation current:<15uA(standby),<30mA(alarm)
alarm volume:>85dB(A)at 3 meters.
Low battery warning:6.5-7.8V
Alarm sensitivity:1.51-2.64%ft OBS
Comply with:UL217&CAN/ULC-S531
Battery sepecification:DC 9V(Alkaline.Carbon Zinc,Lithium battery)
Installation:
1.Turn the alarm body counterclockwise and take off the bracket.
2.Hold the bracket in the installation position as specified in the Recommended Locations,mark installation holes of the bracket with pencil.
3.Drill the two marked installation holes with a 3/16 inch(5mm)drill bit.Tap the two plastic gromments into holes with hammer.
4.Mount the bracket to the ceiling by inserting and tightening the supplied screws into plastic grommets.(Refer to Diagram 7).
5.Connect the battery to power connector.
6.Fix the battery to power connector.
7.Fix the alarm on the bracket and turn the alarm body clockwise , until fully inserted on the bracket.
♥ Tips: Please read the product brochure carefully！
Package:
5*1set of smoke alarms(including 9v battery,screws)
Features
- 【Photoelectric Technology&Material 】: Fire-Retardant ABS V0 Level.UL Listed 9V Battery-Powered Photoelectric sensor Smoke Alarm. photoelectric technology which is optimized to detect slow smoldering fires which generate light smoke, little heat and may smolder from all directions for hours before bursting into flames.
- 【Easy Installation】: Can be installed in several minutes. Coming with screws and bracket. Safety clip feature,not allow mounting of smoke alarm without battery installed
- 【Sound & LED Warning】: When the fire alarm detects smoke or detect combustion particles in the air it will sound their alarms(Alarm volume: > 85dB(A) @ 3 meters) and the red LED will flash rapidly. The LED light and alarm will continue until the air is cleared or the test button is released.
- 【Suitable for Multiple Places】: This smoke detector does not contain any radioactive material. It should be installed in every room (except the bathroom and kitchen), making sure the people in your home will be able to hear and respond to the alarm sound.
- 【100% 10 Years Warranty】 : If there are any problems with our products ,you can contact us ,we must reply you within 24hours as soon as possible.NOTE: Please test it once a month to ensure that the smoke alarm works properly. Please clean up the dust on the alarm every 6 months to prevent the smoke alarm from being clogged or blocked.