Description
Orca Shimmer Mold Release Paste Wax:Highly effective carnauba-based paste wax designed for the fiberglass molder.High value mold release yielding a durable film which is resistant to abrasion.Three to five coats of Orca Shimmer should be applied initially on clean or new molds.Application:Apply Orca Shimmer to a small section at a time (9 square feet or one square meter) until the entire mold surface is covered.Allow the wax to form a haze on the surface.Wipe the surface with a clean cloth to remove excess wax.Buff each coat to a high luster.After this initial application, single coats will continue to give a good release and high surface luster. In high humidity, it may be necessary to give the mold a final wiping with a clean, dry cloth to remove any haze that develops from unreleased solvents. In order to avoid contamination, a clean cloth should always be used when applying and buffing this product.
Features
- carnauba-based paste wax
- designed for the fiberglass molder
- resistant to abrasion