NuTone NPD300Z Smart Z-Wave Enabled Plug-In Outlet Dimmer Module, White

The NuTone NPD300Z Plug-in Outlet Dimmer Module is designed to provide Z-Wave control to a connected dimmable lamp. The NPD300Z module is plugged into any standard grounded AC wall outlet, and the lamp is then plugged into the module. Once connected, the lamp can be dimmed or turned on or off remotely via the Z-Wave controller. The module contains two power receptacles - one controlled, and one pass-through (powered at all times). Unique to NuTone, the Autosense feature allows for local lamp activation independent of the Z-Wave controller status. With Autosense, one can simply switch the connected lamp's manual switch off, then on, and Autosense will instruct the NPD300Z to turn the lamp on. Maximum load: 300 Watts. Requires Z-Wave compatible gateway (sold separately). Range: Up to 100 feet between wireless gateway and/or the closest Z-Wave device. NuTone' s family of Z-Wave certified wireless lighting, security and control products bring a new level of intelligent wire-free capability to commercial and residential environments. The Z-Wave wireless protocol is an international wireless standard for remote home automation, security and other applications. Embedded in each device, the Z-Wave smart chip enables two-way RF communication among hundreds of Z-Wave enabled devices, allowing products and services from multiple manufacturers to work seamlessly. NuTone Z-Wave products are easy to install, and allow dealers to create an integrated wireless network with nearly limitless expansion and interoperability with security and health monitoring systems, energy management, home entertainment, appliances, and more. All products operate at the standard 908.42 MHz frequency, supporting network wide inclusion and are security system compatible. All NuTone Z-Wave products integrate with other NuTone Z-Wave enabled products, and can also act as a wireless repeater to ensure that commands intended for another device in the network are received.