Description
Notes required 1.When using chemical agents, it is required to clean them with clean water immediately after use to avoid corrosion 2. Care not to overpressurize when pressurized When pressurized, reach the necessary air pressure at 10-20 times. When there's less water, press it a few times, when there's morePress gas several times to avoid excessive pressure and damage the bottle 3. If you don't use it for a long time, please reduce the pressure in the bottle and reduce the loss of parts If you don't use it for a long time and the bottle has pressure, the spray parts may wear out.Empty the liquid in the bottle, release the pressure for cleaning, keep longer life. 4. keep it in the shade to avoid prolonged exposure When not in use, should be placed in a cool and dry place, do not expose for a long time, the screen temperature is high,If the pressure is too high, it will cause unnecessary physical discomfort. 5. After filling the water, tighten the lid tightly to avoid crooked loading, otherwise the air will leak, there is insufficient pressure 6. To test the quality of the sprayer, trace amounts of water are normal Before shipping, we will check the quality of each product to ensure that each product can be delivered to the customer smoothly.There may be a trace of water in the bottle.
Features
- [Mode](no plug-in) there are two modes of manual accumulator spray pot: spray fog spray column capacity 2L,Product size: 34.5 (H) x11.5(R)cm/13.85 (H) x4.53(R)inch weight: 400g/ 0.88lb material: PE;
- [Operating Principle] Manually pull up and down the pump bar(pressure gas bar), increase the pressure inside the kettle, after pressing the massage button, water mist from the nozzle,If you can't spray the fog, you need to press the gas again.Rotary nozzle can switch spray mode;
- [Scope of use] the use of hand pressure accumulator watering pot to change different liquids can water flowers, plant trees, wash the car, after using water timely cleaning watering pot, avoid nozzle corrosion, reduce the service life;
- [Use caution]After the kettle is filled with water, please pay special attention to whether the black rubber ring inside the lid is loose, be sure to tighten the lid, the lid should not be skewed, otherwise there will be air leakage or no air pressure without spraying water mist phenomenon;
- [Hint] the product will be loaded with water to test the spray function before delivery, and will be drained before delivery, but there will be a small part of residual in the pot body, which is a normal phenomenon, after the use of the product, please put it in the place where children can't reach, not easy to long-term exposure;