Description
Frequency range: 50kHz - 3GHz
System dynamic range (calibrated): 70dB (up to 1.5GHz), 60dB (up to 3GHz)
S11 noise floor (calibrated): -50dB (up to 1.5GHz), -40dB (up to 3GHz)
Sweep rate: 80-100 points/s
Display: 2.8'', 320 x 240
USB interface: Micro USB
Power: USB, Maximum charge current 1000mA
Battery: 1950mAh lithium-ion
Battery connector: JST-XH 2.54mm
Maximum sweep points (on device): 201
Maximum sweep points (USB): 1024
Port 2 return loss (1.5GHz): 20dB typ
Port 2 return loss (3GHz): 13dB min
VNA-QT software supported platforms: Linux, Windows (7+), Mac OS
VNA-QT software download:
https://github.com/nanovna/NanoVNA-QT/releases
User guide:
https://github.com/nanovna/NanoVNA-QT/blob/master/ug1101.pdf
Features
- ✔➸ NanoVNA V2 is a low cost 3GHz T/R vector network analyzer, designed in collaboration with OwOComm. The V2 hardware is a new from-scratch design and is not based on the original NanoVNA by edy555. Compared to the original NanoVNA, V2 does not use harmonics for measurements and achieves higher dynamic range.
- ✔➸ The S-A-A-2/NanoVNA_V2 uses a similar user interface to the NanoVNA, but with a different technical architecture, It has more superior frequency than other nanovna, Frequency range: 50kHz - 3GHz, System dynamic range (calibrated): 70dB (up to 1.5GHz), 60dB (up to 3GHz), S11 noise floor (calibrated): -50dB (up to 1.5GHz), -40dB (up to 3GHz)
- ✔➸ Sweep rate: 80-100 points/s, Maximum sweep points (on device): 201, Maximum sweep points (USB): 1024, Port 2 return loss (1.5GHz): 20dB typ, Port 2 return loss (3GHz): 13dB min.
- ✔➸ This VNA V2 Built in 1950mAh battery, Package include Micro USB data cable x1, 30cm SMA male to male SS405 RF cable x2, SMA male calibration kit - OPEN x1,SMA male calibration kit - SHORT x1,SMA male calibration kit - LOAD x1,SMA female to female connector x1