Lonyiabbi 1:1 Arc Reactor MK1 DIY Finished Product Model Led Light USB with Display Box

I love you 3000 ❤ ❤ ❤ ———————————————————————————————————>>>>>>>>>>>>>>>>>———— Contents:Arc Reactor MK1 LED Light, Display Box（Need to assemble）, Remote Control,USB power cord Arc Reactor material: polymer benzene + alloy Base material: ABS Display box material: Acrylic plexiglass Display box size: 15.5*15.5*18cm （6.1*6.1*7.08 inch） Arc Reactor(including bracket): about 12.5cm（4.9 inch） Arc Reactor(including stand base): about 16cm（6.3 inch） —————<<<<<<<—————————————————— The plexiglass box is DIY, you have to peel off the protective coverings, then uncover the sticky strips on the edges covered in red. Use the base to help you, and dry fit the pieces together before taking off the red strips, so that you know how it's going to go together. Mine didn't fit together perfectly, but it was pretty close and you can't tell just by looking at it, only by touching it. There are also two extra pieces of plexiglass to prevent damage to other goods. There are 2 holes in the base, the center one is for the stand. Unscrew the bolt on the bottom of the stand, put the bolt through the hole, and then screw the stand tightly back together. The off-center hole is for the power cord. The stand tilts, and you can just put the arc reactor into the cradle. It just sits in there as long as you tilt it back enough. There is no way to attach it in, but you don't really need to, it sits in there just fine. The power cord is just standard USB-B. You can buy little adapters such that you can plug it into a regular outlet. There is also a remote control so you can turn it on and off, control the brightness, and (for some reason) set it to blink and control the blink speed and pattern.