Description
Jeacent 通用空调支撑支架
使用通用重型空调支撑支架优化您的空调安装安全。
特点:
- 从室内安装
- 减轻窗台的压力和重量
- 最大限度地减少对窗户、窗户部件或外墙造成的损坏
- 实心环氧树脂涂层厚钢板,哑光表面防止 A/C 从窗户中掉出
- 可与任何品牌名称的橱窗空调配合使用
规格:
- 适合厚度从 10.16 厘米到 38.6 厘米的墙壁
- 17 英寸(约 43.2 厘米)长 A/C 休息表面
- 支撑可承受 160 磅
- 支持 A/C BTU 额定值:
5,000 BTU
6,000 BTU
7500 BTU
8,000 BTU
9500 BTU
10,000 BTU
11,000 BTU
12,000 BTU
14,500 BTU
16,000 BTU
18,000 BTU
24,000 BTU
窗户要求:
- 窗台厚度不能超过 16 英寸(约 40.6 厘米)
- 窗台必须至少为 2 英寸(约 5.1 厘米)深
- 窗台必须能够接受 2.5 英寸(约 6.4 厘米)长的螺丝
- 窗口或窗凳不能超过 1.6 英寸(约 4.2 厘米)
- 不能与滑动式平开窗或平开窗一起使用。
Features
- Universal Design - adapts to most window units (check description below for window requirements)
- Indoor Installation - easy breezy install, without exterior work, no drilling of outside wall or siding, just drilling into window sill
- Relieve Stress on the Window - Transfers the stress and weight from the window sill and sash to the support and window frame for safety
- Fits wall thickness from 2" to 15.2", exclusive built-in bubble level to correct mounting slope position
- All necessary hardware included and all weather construction