Description
High Temp Grill Gasket Kamado Joe Accessories Replacement★15 ft long,1.14 in wide,0.14 in thick★High Temp Performance Replacement Felt Gasket Fits for Kamado Joe Classic and Big Joe,Self stick.✔Good Quality On Heat Sealing High density material ensures high performance on heat sealing.✔Safe To UsePromised totally safe with high temp fireproof material.✔Easy To InstallSelf adhesive tape on the back allows you install easier.Our accu-fit gaskets are designed for a perfect fit every time.⚠Note:All replacement gaskets include enough felt for grill top, bottom and chimney.Easy To Clean and Install When Follow The Instructions：1. Begin by slightly moistening the old gasket material with acetone or isopropy.2. Use Gasket Scraper for removing old gaskets and adhesives before installing new gaskets.3. Completely remove the old gasket with a flat-edged Gasket scraper, and then clean the rim of the base and lid with acetone or isopropy.4. Allow ceramic to dry for at least 30 minutes; the surface must be clean and dry for the new gasket to adhere.5. Simply remove the backing from the gasket, taking care not to touch the adhesive side, and press firmly down onto the rim. Carefully curve or bend the gasket material around the rim, being careful not to let the gasket material hang over the inside edge.6. Do not pull to stretch the gasket; there is ample material for the top and bottom rim of your EGG. Trim any excess length as needed.7.Then allow gasket to cure for 24 hours in a dry location with the lid closed.⚠CautionMake sure the EGG is completely cool. Change gasket only in a dry, well-ventilated location.To improve longevity, keep gasket clean of grease and oils.
Features
- PERFECT KAMADO JOE ACCESSORIES - 15ft Long, 1.14" Wide, 0.14" Thick,perfect fit Kamado Joe Classic and Big Joe or other kamado grills.Enough gasket to fit the base and top lid.Please confirm the grill size before purchase.
- HIGH TEMPERATURE MATERIALS - Superior high-temperature fibers materials,Won't burn or melt,High-temp peel & stick adhesive backing without messy spray adhesives，much better than factory BGE wool. It is a ideal replacement for a worn, leaks or fried gasket on your BBQ smoker.
- NICE AND TIGHT SEALS - Keeping the heat and smoke inside.No more leaking smoke,improved temperature control,which helps save on charcoal.You won't tear through the charcoal like you do with a worn gasket.
- EASY TO APPIY - Very easy to peel,self stick and sticks great on the grill surface.High-temp peel & stick adhesive backing without messy spray adhesives.The width of a special design for each size Kamado Joe,no extra cuts are needed.It is a ideal replacement for a worn, leaks or fried gasket on your BBQ smoker.
- INSTALLATION TIPS - ❶Clean and Dry.Make sure the surface is completely clean and dry before peeling off the backing and stick it to the grill.❷Be Gentle. During the paste process,you can peel and stick a few inches at a time , and do not pull and stretch it.❸To improve longevity.Allow gasket to cure for 12 hours in a dry location with the lid closed and keep gasket clean of grease and oils.