Centeni Joy Con Charging Dock Switch Controller Charger Station for Nintendo Switch 2017& Nintendo Switch OLED Joy-Con

Using Instructions

1. Turn on the DC 5V power supply, when power on, the red LED is on for 0.5 seconds and the green LED is on for 0.5 seconds.
If having three to four Joy-Cons are attached to the dock, every Joy-Con is powered for 1.5 seconds in turn,
and after all the Joy-Cons have completed this action, two of the grips will be charged.
2. Up to two Joy-Cons are charging at the same time , the charging current of each grip is around 200mah.
3. Over-current protection: Each charging port, the maximum current allowed to pass is 400mah, if more than 400mah,
the charging port will be over-current protection, red LED flash , once Joy-Con is pulled out, back to normal mode.
4. Priority charging principles
1) Charged in the order of channels 1, 2, 3, 4
2) The inserted Joy-Con is preferentially charged

5. Time-out charging: In theory, the grips can be fully charged around 3 hours.
If the grips is connected to the charging dock over 4.5 hours and still not fully charged, the green LED will directly on.
6. Indicator status description
1）Grip accessed, the red LED longtime bright
2）Full charged, the green LED long time bright
3）Without charging, all LEDS are off
4）High and low voltage over-voltage indication: red LED slowly blinking.
below 4.2v, the voltage into the low voltage mode, more than 4.7v back to normal;
over 5.6v into the high voltage mode, below 5.3v back to normal.

Operating Voltage

DC 5V (USB port power supply)

Output characteristics

1. output voltage: 5v
2. Output Current:
1）The average output current is 200mah;
2）Allow a signal charging port to pass the maximum current is 400mah, if more than 400mah will over current protection and the red LED flash.

Package Include

Joy-Con Charging Dock witch 1M USB Cable*1pcs