Technical Specification: Machine Name: ELEGOO Wash & Cure Machine Control Method: Touch button Rated Power: 48W Input Voltage: 110V/220V 50/60H UV Light: 385nm+405nm（8+8） Time Setting: 0-15mins Machine Size: 200mm*200mm*352mm Maximum Wash Volume: 125mm*85mm*160mm Maximum Curing Size: φ140*165mm Machine Net Weight: 4.8kg Curing Time Setting: For model with diameter less than 30 mm, the curing time is recommended to be 2 minutes. If the surface structure of the model is complex, it is recommended to increase the curing time properly. Operation Instructions: 1. After the model is printed, please clean and blow-dry the model before putting it into the machine, otherwise the surface of the model would be sticky, cracked or covered with white residues. 2. If the model become yellow after curing, please adjust the curing time. Over curing will lead to a yellowing model. 3. The recommended ambient temperature is 0-40 degrees, and the ambient humidity temperature is 20%-50%. 4. To avoid overheating of the curing cabinet, please do not use it for more than 40 minutes at a time. 【Special Notes 】The washing function is not quite suitable for 3D models printed with water washable resin, which is better to be washed with running water.
- 【Dual Function】Wash and Cure 2 in 1 design makes washing and curing for 3D printed models reallized in one machine. The operating process is now more efficiency with less effort to meet your different needs.
- 【Fexible Washing Mode】The models can be placed in the cleaning basket to clearn separately, or mount the build plate with models on it and wash them together, which can avoid direct contact to uncured resin. The height of the platform bracket can be adjusted to fit the liquid level in the bucket.
- 【Intelligent Curing Control】Built-in 8pcs 385nm plus 8pcs 405nm UV curing lamp beads, work together with the 360-degree rotating curing turntable, which can cure the models evenly. 0.96 inch TFT LCD screen can visually display the set time and the remaining time. With automatic protection, picking up the cover in the operating state will suspend operation and emit a beeping sound. The cover can block 99.95% of ultraviolet rays to protect your vision.
- 【Ideal Compatity 】Compatible with most of the LCD/DLP/SLA 3D printers like ELEGOO Mars, Mars Pro, Mars C, photon, photon s on the market, which provides you an ideal support for your 3D resin prints.
- 【Special Notes 】The washing function is not quite suitable for 3D models printed with water washable resin, which is better to be wahed with running water.