Description
Operating and Connecting:
1.To use the optical fiber cable to connect the optical fiber signal source (such as blue-ray player, the computer and so on) with the switcher input.
2.To let the switcher output port connected to the optical fiber signal receiver (such as amplifier, home theater and so on) by using the optical cable.
3.Connect IR extender line to IR extender line input port.
4.Connect 5V power supply to the matrix DC input port
5.Use the remote or button to switcher the input source freely.
Remote-control unit operating instructions:
Power swtich button
SPDIF/TosLink input port switch button, If you want to choose input source 2 , direct press numeric key 2
Note: Before using the remote of the unit, please first take out the insulation plastic film from remote-control unit tail.
If the remote is under long-time rest state, please insert the insulation plastic film.
SPECIFICATIONS:
Support audio format:LPCM2.0/DTS/Dolby-AC3
Peak wavelength:650nm
Max baud rate:16Mbps
Output cable distance :≤40m(Use the optical fiber cable loss less the 0.2Db/m )
Max working current:100mA
Power adapter format:Input:AC (50HZ, 60HZ) 100V-240V; Output: DC5V
Operating Temperature range:(0 to +40℃)
Operating Humidity range:5 to 90%RH (No Condensation)
Dimension (L x W x H):110*49*20(mm)
Weight:283g
Notes:
Pls use the original factory power adaptor.
Before power on, pls check the connection line carefully. And make sure that all interfaces are normally connected.
To try again to connect the cable to be free from the unsuccessful connection.
The accessories with the machines lists :
1、5V Power Adaptor
2、User manual
3、Remote-control unit
4、 IR extender cable
5、Optical switcher 4x1
Features
- Four ways of optical fiber signals switch to one sets of SPDIF/TosLink signal receiving device
- Audio format support : LPCM2.0/DTS/Dolby-AC3; Support signal retiming
- Used optical fiber cable loss less the 0.2Db/m, Output distance is up to 40m. The input control can through R/M and also can directly press the button
- Support last time working state memory when power off. Over-voltage protection can prevent the damage caused by connecting unmatched power
- Adapter to the machine; LED status indication; No loss of quality; Installs in minutes; Need DC5V power supply