Description
Compared with the new version made by the previous generation, the main improvements are as followsAdd 10 solid - state capacitors, one for each channel, to connect more fans.Increase the relative width of circuit board wiring. Increase the thickness of copper coating. Increase the gold sinking process. Add power lamp indication. Improve the wiring rationality of the circuit board, the power supply and signal are divided into two sides of copper. Improve the paste used in the patch. Improved backside double - sided colloidal product. Improved PWM line over - length with plug package.
Commodity use:1: expand 10-bit fan 4-pin interface to solve the shortage of mainboard interface and centralize fan wire processing. 2: the PWM interface is connected to the mainboard cpu_fan interface. Red is the special interface of CPU fan (with speed measurement function). The black interface is PWM conventional fan interface (no speed signal, but PWM function is not affected). Note: to avoid speed measurement confusion, computer crash, a multi-way interface to expand the interface, only show one of the fan speed measurement! 3: power supply can be directly supplied by power supply, which can reduce the load pressure of the mainboard4. Scope of use: applicable to 12V motherboard 3pin/4pin fans. [3pin fan can also be used, but the plug is running at full speed, because 3pin fan has no PWM regulating function]5: the hub PCB board is equipped with 3M backing adhesive, which can be pasted in a smooth place. There is also a fixed screw hole (the product is provided with a 40CM long PWM temperature control cable).This product is PWM governor, the function is to expand the single motherboard four-pin port into multiple ports for unified speed adjustment, if your fan is a 3-pin fan, you can also plug in, but can not achieve PWM control speed! Do pay attention!
Features
- ✔MOST EFFICIENT SATA TO FAN ADAPTER IN 2019✔ Managing multiple fans from a single case input has become easier for you now. If your motherboard lacks fan interfaces, use this neat & tidy way to add fans & expand fan interfaces designed for 12 V 4-pin fan. This PWM hub SATA accurately controls fan speed, you can slow down & speed up the fans up to the maximum speed. You need to connect the SATA & the 4 pin at the same time to run multiple fans.
- ✔PWM FAN CONTROLLER TEMPERATURE CONTROL✔ The CPU Port (red port), would be the only port that can be controlled by the operating system. The other 9 black fan ports CAN NOT be adjusted in speed and will copy the power level of what the red port is at. Please note 4 Pin fan speed can be adjusted by temperature control as well. 3 Pin fans may also be used but have no PWM function and will stay at it's fixed speed after inserting.
- ✔INSTALLATION & CONFIGURATION✔ Simple installation & easy configuration, this fan splitter will work even if only connected to the PSU with SATA connector. You just plug the board into the CPU fan motherboard connection & then SATA for power. It has EVA double-sided adhesive tape at the back of the hub to mount to the case or any flat place. You can fix the screw hole in the middle of the PCB to facilitate fixing to a part of the chassis.
- ✔STEP BY STEP SET-UP✔ You will receive 1 hub & 1 PWM connector in your package. The PWM interface is connected to CPU fan interface on motherboard by PWM cable & the red interface is dedicated for CPU fan. Connect 1 fan to the red port on fan hub then connect remaining fans. You then need to connect the fan hub’s PWM cable to the motherboard. Connect the power supply SATA cable to fan hub before you attach/stick it on the chassis.
- ✔MONEY BACK PRODUCT WARRANTY✔ Our product is backed up by manufacturer’s warranty so feel free to contact us for any query or information. We have a track record of ensuring happiness of clients and are absolutely confident that our product will exceed your expectations. Just in case the product falls short of your expectations in any manner, you can return it for a 100% refund. We will go an extra mile to redress the situation at hand.