Description
Specifications:Material: plastic, copperColor: yellowSize: (Approx) (LxW) 74x24mm/2.9x0.94inchPackage Included:1 PC xBattery Extended Adapter2 PCs x Double-sided tapeInstall:1. Install the power supply connector against the battery contacts.Then install the original battery.2. Turn on the power to see if the power supply connector can work normally, and then stick the power supply connector with a film on the top of the battery.3. The external power supply is installed, and now you can connect your own 3s battery pack to balance and increase the flight time (note: turn on the power before connecting to the external power supply)4. When fixing the battery with glue, use tape or other methods to fix it again.5. Finally, use the XT60 male connector to connect to the external power supply.Precautions1. Before use, you need to test whether the power supply connector is working properly.2. Pay attention to the positive and negative when installing the external power supply.3. When using an external battery, you must use a 35 battery pack and the voltage is similar to that of the airplane to avoid large voltage differences.4. Try to avoid running out of power when flying, so as not to damage the battery.5. For your own DTY electronic equipment, pay attention to adding a resistor to lower the voltage(the delayer uses the voltage of the aircraft. 11. For IV-12.6V,you need to change the resistance of the resistor according to your needs. For example, you can add a 10K resistor to the LED light.)Note:1. Due to the light and screen difference, the item's color may be slightly different from the pictures.2. Please allow 0.5-2 cm differences due to manual measurement.
Features
- Suitable Model: Suitable for FIMI X8-SE 2020. Can increase its flight time.(The increased duration is determined by the external battery capacity and weight, which can increase the original flight time by about 10%).
- Features: At the same time, it can also be used as a power supply port for external electronic equipment.
- The external battery must be 3S, and the capacity is 1350mAh to 4000mAh. The larger the capacity, the heavier it will affect the flight time. The discharge rate is recommended to be 75c.
- Easy disassembly: It is recommended to use tape or other methods to fix the battery when using Double-sided tape.
- Note: Only 1pc power adapter, and 2pcs Double-sided tape, Not includes drone and other accessories.