Description
Specifications:
Remote control omnibearing:
Product load 1500g; Support Agreement PELCO-D
Baud rate 2400; Address range 1-200
Control method RS485; Power supply DC12V 2~1.5A
Working temperature -30°C~55°C
RS485 Wire control:
Horizontal rotation angle 255 degrees
Rotational speed horizontal speed 6 degrees, 12 degrees, 20 degrees
Vertical rotation angle 60 degrees; Vertical rotation speed 9 degrees/second
Limit left and right electronic limit, can be set arbitrarily; Limit automatic scan Yes, three speed adjustable
Preposition Yes, 8 presets; Preset cruising Yes, 1 preset cruise line, 3 level of rotate speed
Watch bit function Yes; Manually reset function: Yes
Address Code 128 Soft Address Codes
Control method RS485
Interface DC Power Supply + RS485
Power supply DC 12V±5% / 100mA
Power consumption 0.9W
Working environment -25 °C -55 °C, humidity less than 95% (non-condensing)
RS485 Wire Cntrol omnibearing length 195mm; RS485 (Horizontal rotation ) length 170mm
Package List:
1 * Rotating Bracket Pan for CCTV Camera (Based on what you choose)
Features
- 255° Horizontal rotation. Left and right as well as up and down stop positions can be freely adjustable. The rotating bracket with remote control that you choose has omnibearing rotate. And the RS485 wire control also support. The RS485 wire control (horizontal rotation) only support left and right.
- With infrared remote control type can support the remote control to achieve rotation, left and right limit scanning, guard bit, preset position, cruise, speed settings, initialization and other functions.(If you choose the stand with remote control) 60° Vertical tilt. Up and down moving, 9 degree per second. Compatible with most available cameras in market.
- Compatible with most available cameras in market. Easy to install. Built-in Intelligent decoder, intelligent preset position, intelligent scan function. Waterproof design, dust-proof and high temperature resistance, industrial level plastic material.
- Can be easily connected to HD camera’s R-S485 and DC 12V output. Easy to make fixed HD camera to be with rotate function, but no need extra wiring.
- Ultra-low power consumption, no need to increase power supply, can share a power supply with camera. Support to set the preset bit command to change the baud rate.