If you use plain jack plates, the pinch welds and other frame support members can bend and damage your vehicle. But what are the options when it comes to adding cushions between metal floor jack cups and the painted underbody when lifting a car? Instead of risking scratches and damage to your car, use the ABN 5.5-Inch Frame Rail Jack Pad 2-Pack. These rubber jack pads slotted hydraulic jack pad pucks are jack stands pad pucks designed to take the majority of the force so your car does not take the damage. They are 1.75 inches thick from top to bottom, have a 5.4-inch diameter at top widest point, and 4.1-inch diameter at bottom smallest point. 3 successive step sizes create a taper for the 4 notches that fit onto 4-inch cup rim lugs to keep the jacking puck in place. Jack not included. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- SAFELY LIFT YOUR VEHICLE WITHOUT DAMAGE: The ABN Large 5.5-Inch Pinch Weld Jack Pad Car Jack Puck 2-Pack are floor jack pad pucks that prevent jacks from exposing structural metal and are designed to protect the pinch welds, your vehicle under chassis, and overall frame so you can safely lift your vehicle at the proper jack points without scratching paint or causing metal-on-metal damage while using hydraulic jacks
- BUILT FOR SAFETY: These floor jack rubber pad pucks are constructed from stiff rubber that cushions your car from damage and increases safety when secured properly; Bottom side of slotted rubber jack pad includes textured grooves to ensure correct and safe fitment on jack without slippage
- USE YOUR JACKS: Top side of car jack pad has slotted crosshairs to align with and protect side pinch welds while the bottom of the jack lift pad is also keyed with 4 recesses that fit onto 4-inch cup rim lugs on your jack to prevent the pad from spinning on the floor jack cup (cup and pad contact starts between these lugs)
- LARGE SIZE: Fits beveled 5.5-inch steel lift cups bowl saddles on standard hydraulic floor jacks; Floor jack saddle pad has 5.5-inch (14cm) top diameter and 4-inch (10.2cm) bottom diameter, 1.75-inch height (4.4cm), 4 slots have approx. 0.4-inch width and 0.75-inch depth (1cm x 1.9cm); To ensure fitment, measure ID of your jack and compare to 5.5-inch diameter of this jack rubber stabilizer pad while ensuring your vehicle has enough clearance - this jack stands pad adds 1 inch (2.5cm) to height
- PACKAGE CONTENTS: Stabilizing jack pads package includes (2) 5.5-inch pinch weld protector slotted jack pad pucks to best suit your needs; Jack stand rubber pads only - jack not included