Description
Use of the charger:
1. Before charging, please connect the DC terminal to the battery before connecting the AC terminal. After charging is complete, unplug the AC terminal and then unplug the DC terminal. If you unplug the battery before charging, especially when the charging current is large (red light is on), it is easy to damage the charger.
2. Please do not drain the battery and then run out of the charger. Otherwise, the battery will not be protected or even damaged.
3. If your battery is not used for a long time (2-3 months), charge the battery before use. Make sure the battery is not damaged.
4. Please use the charger in a dry place.
5. After charging or charging is complete, be sure to unplug the DC terminal and AC terminal.
8. Please confirm your battery as it is used to charge the lithium battery. Do not use the charger on a LiFepo4 battery, or the charger will become very hot.
Battery type: Lithium battery
Working power: 90-230Vac, 50~60Hz
Applicable battery voltage: 36V
Output voltage: 42V (for 10S lithium-ion battery)
Output current: 2A
Battery protection: SCP, OVP, OCP, OTP
Charging mode: constant current - constant voltage - le flow (floating charging) three-stage intelligent charging
Charging efficiency: ≥85% (full load)
Working temperature: 0 °C ~ +40 °C
Storage temperature: -20 ° C ~ +85 ° C
LED display: red: in charging state, green: fully charged
Packing:
1 * 42V 2A charger
1 *US standard power cord
Features
- 42V 2A 50-60Hz globally applicable AC input 100-240voltage, power: 84W output DC plug: 5.5 * 2.1 *11 (mm).
- 100% full load aging test with built-in EMI filter and minimal ripple. The precision current is between ±0.1A and the voltage tolerance is ±0.1V, which is definitely not a virtual mark.
- The simple fan built into the charger has fins that surround the board and dissipate heat through the housing. Therefore, it is normal to have some heat on the casing when charging, but it is very durable.
- Charger protection: short circuit protection / over current protection / over voltage protection; A red light indicates charging is in progress; a green light indicates that it is fully charged or disconnected. Tips: To avoid overheating the charger, do not charge for too long.
- The outer casing is made of high-quality plastic and has a smooth appearance and no impurities. Good safety performance and more reliable use.