Description
Complete Home Protection
According to US data analysis, a family fire begins every 38 seconds. The faster you know about the fire, the sooner you start moving your family, and the smoke alarm at work reduces the risk of home fire deaths by 50%.
Advantage
1.The smoke alarm with test button allows you to test the unit's functionality.
2.It features a low battery alert to remind you when to change the battery and has a missing battery guard to ensure that a battery is placed inside the alarm.
3.The side battery drawer slides open for easy battery replacement. A blinking power indicator on the unit confirms that it is receiving power.
4.The alarm contains an optional pin to lock the battery and unit in place for tamper resistance.
5.It can be mounted on either the ceiling or the wall and can be used in mobile homes and RVs.
Attention1.The Smoke Detector contains the test button.Flickering power indicator,When the red LED light flashes for 32 seconds, it indicates that the smoke alarm is running normally.
2.When the alarm senses products of combustion and goes into alarm, the red LED will flash rapidly (one flash per second)..The rapid flashing LED and pulsating alarm will continue until the air is cleared or the test button is released.
Specifications:
1.DC 9V battery operated
2.Photoelectric chamber for early detection from all directions
3.Loud>85dB (A) alarm signal @3M
4.Flash alarm indicator (red LED).
5.Test button for easy recommended monthly testing
6.Low battery signal
7.Safety clip feature, does not allow mounting of smoke alarm without battery installed
8.Ceiling mounting
9.Easy to install with mounting bracket
10.5 years prodcut life time
Features
- 【Photoelectric Technology】Our photoelectric smoke alarm with Photoelectric technology which is optimized to detect slow smoldering fires which generate light smoke, little heat and may smolder for hours before bursting into flames.
- 【Sound& LED warning】When the alarm senses products of combustion and goes into alarm,the red LED will flash rapidly(one flash per second).The rapid flashing LED and pulsating alarm will continue until the air is cleared or the test button is released.Smoke alarms can only sound their alarms when they detect smoke or detect combustion particles in the air.They do not sense heat,flame,or gas.
- 【Easy Installation】Can be installed in several minutes. Coming with screws and bracket. Powered by one 9V battery(included), it will not be affected by power outage. When an intermittent "chirp" accompanied by a red LED flash every 32 seconds indicates a low battery.
- 【Suitable for multiple places】This smoke alarm does not contain any radioactive material. Smoke alarms should be installed in every room (except the bathroom and kitchen), finished attics and basements, making sure the people in your home will be able to hear and respond to the alarm sound.
- 【Warranty and Service】If there are any problems with our products ,you can contact us ,we must reply you within 24hours as soon as possible.NOTE: Please test it once a month to ensure that the smoke alarm works properly. Please clean up the dust on the alarm every 6 months to prevent the smoke alarm from being clogged or blocked.