Description
Overview
This is an E-Ink display HAT for Raspberry Pi, 2.13inch, 250x122 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.
Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
Features
No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc.
Onboard voltage translator, compatible with 3.3V/5V MCUs
Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
Specifications
Operating voltage: 3.3V/5V
Interface: SPI
Outline dimension: 65mm × 30.2mm
Display size: 23.71mm × 48.55mm
Dot pitch: 0.194 × 0.194
Resolution: 250 × 122
Display color: black, white
Grey level: 2
Partial refresh time: 0.3s
Full refresh time: 2s
Refresh power: 26.4mW(typ.)
Standby power: <0.017mW
Viewing angle: >170°
Interface
SYMBOL--DESCRIPTION
VCC-- 3.3V/5V
GND--Ground
NC--NC
DIN--SPI MOSI pin
CLK--SPI SCK pin
CS--SPI chip selection, low active
DC--Data/Command selection (high for data, low for command)
RST--External reset, low active
BUSY--Busy status output, high active
How-to-use document/User Manual://bit.ly/3hZh77i
PACKAGE CONTENT
2.13inch e-Paper HAT x1
RPi screws pack (2pcs) x1
PH2.0 20cm x1
Features
- This is 2.13inch Rev2.1 Version E-Ink display HAT for Raspberry Pi,250x122 resolution, with embedded controller, communicating via SPI interface, supports partial refresh. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
- No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing.
- Operating voltage: 3.3V/5V.Interface: SPI.Display color: black, white.Partial refresh time: 0.3s.Full refresh time: 2s.Viewing angle: >170°.
- Onboard voltage translator, compatible with 3.3V/5V MCUs.Preserved solder pads for SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc.Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)